Dogger Bank Wind Farm, a 50:50 joint venture between SSE Renewables and Equinor, has signed a contract with GE Renewable Energy for 190 wind turbines for the Dogger Bank A & B offshore wind project. Dogger Bank A & B will be the world’s first offshore wind farm to use GE’s Haliade-X 13 MW turbines,
INEOS has signed an agreement with Engie to buy 84 MW of energy produced by the Norther offshore wind farm in Belgium. The 84 MW will initially be used by existing INEOS production sites and later by Project ONE, the company’s investment in two chemical plants for the production of ethylene and prop
Ørsted has held the groundbreaking ceremony in the Port of Taichung for the Operations and Maintenance (O&M) base of the 900 MW Greater Changhua 1 & 2a offshore wind farms. Scheduled to be operational from 2022 and onwards, the O&M base is the first of its kind that Ørsted has invested in building i
Dogger Bank Wind Farm has confirmed Able Seaton Port in Hartlepool, UK, as the marshalling base for the wind turbine installation activities for the Dogger Bank A & B offshore wind project. As part of the agreements for the supply and service of 190 of GE Renewable Energy’s Haliade-X 13 MW wind turb
Swancor Renewable Energy has revealed plans to develop the 4.4 GW Formosa 4 offshore wind project off the Miaoli County in Taiwan. The portfolio would consist of three sites, including Formosa 4-1, Formosa 4-2 and Formosa 4-3, which would cover a large maritime area located 18 to 20km offshore. Swan
The first three floating foundations built by the Navantia-Windar consortium for the Kincardine offshore wind farm are ready to be loaded out from Navantia’s yard in Fene, Spain. The first of the wind farm’s five floating foundations will be loaded onto Boskalis’ semi-submersible heavy transport ves
Aarsleff BIZ, a Per Aarsleff company, has loaded out the first batch of concrete work platforms (CWPs) for the Windpark Fryslân nearshore wind farm in the Netherlands at its factory in Swinoujscie, Poland. The CWPs, each weighing 76 tonnes, will be mounted on the project’s monopiles, which are curre
The Ohio Power Siting Board has unanimously approved an amendment which would eliminate the nighttime shutdown condition for the Icebreaker offshore wind project. The revised ruling has yet to be drafted and voted on. While the final decision is not yet in place, the amendment, offered by Mary Mertz
Seaway 7 has selected COOEC-Fluor Heavy Industries to manufacture and deliver jackets and suction caissons for the Seagreen 1 offshore wind project. COOEC-Fluor’s scope of work for Seagreen 1 includes the fabrication and load-out of the suction caisson jackets. The manufacturing work will be carried
SEV, the main energy supplier in the Faroe Islands, has revealed plans to build an offshore wind farm near this European island nation’s capital Tórshavn. The wind farm will have a capacity of between 96 MW and 120 MW. The project will be a joint venture between Faroese energy providers and various
The last jacket foundations manufactured by Lamprell for the Moray East offshore wind farm have been loaded onto a heavy lift vessel at Rig Metals in Dubai, UAE, and will soon set sail to Europe. According to DEME Offshore, the last jacket delivery from Lamprell and the recent installation of the th
Around three-quarters of wind turbines have been installed at the 731.5 MW Borssele III and IV wind farm off the Netherlands, MHI Vestas said. The first of the wind farm’s 77 MHI Vestas 9.5 MW turbines was installed at the site some 55 kilometres off Vlissingen at the end of May. Van Oord’s installa
EDS HV Group has completed substation maintenance work at the Rhyl Flats offshore wind farm located off the coast of North Wales. Maintenance work was done for every electrical asset, including 132kV open mesh switches, power transformers, auxiliary transformers, battery systems, shunt reactors and
Jan De Nul’s jack-up vessel Taillevent has installed the first turbine at Taiwan Power Company’s Changhua Phase 1 offshore wind project. The 109.2 MW project will feature a total of 21 Hitachi 5.2 MW turbines with a downwind rotor mounted on jacket foundations. According to Jan De Nul, with the firs
