
After approving the production permit extension for the Samsø offshore wind farm earlier this month, the Danish Energy Agency (DEA) has now granted extended permits to two more of Denmark’s oldest offshore wind farms, Middelgrunden and Nysted. To support its decisions, the DEA has requested that the

Brazil’s SENAI Institute of Innovation in Renewable Energy (ISI-ER) and SENAI’s Rio Grande do Norte branch, SENAI-RN, expect to receive an installation permit for their pilot project, the country’s first offshore wind project to be granted a preliminary licence, within 12 to 18 months and to have it

Estonia’s Consumer Protection and Technical Regulatory Authority (CPTRA) has launched the superficies licence proceedings and environmental impact assessment (EIA) for the Saare 1 offshore wind farm, developed by Oxan Energy. Following the launch of the superficies licence proceedings and EIA, the F

A short geotechnical survey is scheduled to begin at the Dogger Bank D offshore wind farm site in the UK this month. The offshore supply vessel (OSV) Connector will be deployed to carry out the work within the array area and the export cable route. The works will be performed in a single campaign, e

Brazil’s Institute for the Environment and Natural Resources (IBAMA) is set to award the country’s first preliminary investigation licence for an offshore wind project today, 24 June. The first project – of the total of 104 that IBAMA is currently processing – to receive the licence is the pilot off

The final inter-array cable was installed at the 488 MW Îles d’Yeu and Noirmoutier (EMYN) offshore wind farm in France, developed by Les Éoliennes en Mer Services. The 61st and final inter-array cable was installed at the EMYN site located 11.7 kilometres from the island of Yeu and 16.5 kilometres f

The construction of the high-voltage alternating current (HVAC) infrastructure has begun with a first steel cut ceremony at the HSM Offshore Energy yard in Schiedam, the Netherlands. The HVAC modules will be directly installed on the Princess Elisabeth offshore energy hub (MOG2) in Belgium. The HVAC

The onshore consent application for the up to 1 GW Muir Mhòr floating offshore wind farm has been approved by the Aberdeenshire Council in Scotland. The application covers the floating wind farm’s onshore infrastructure, including underground cabling and a substation. The wind farm is the first full

The last three monopiles for RWE’s Sofia offshore wind farm in the UK have been loaded at the quay of EEW Special Pipe Constructions (EEW SPC) in Rostock, Germany. According to EEW SPC, a total of 100 monopiles, with weights of 1,143 to 1,521 tonnes and lengths of up to 91.8 metres, were loaded onto

Danish transmission system operator (TSO) Energinet has completed the construction work related to the connection of the 1 GW Thor offshore wind farm to the national grid. The construction work began in January 2023 and has been completed on time, said Energinet. The scope of work included moving 95

The first of two offshore converter station topsides for Ørsted’s Hornsea 3 offshore wind farm has arrived in Haugesund, Norway. The converter station topside began its journey from Thailand to Norway in April 2025, where it will undergo final outfitting and commissioning. The platform is scheduled

A Floating Light Detection and Ranging (FLiDAR) system has been installed at the Admiral Lee offshore wind farm site in South Korea. The FLiDAR system, which is a critical component for the project’s wind resource and environmental data collection, was installed by Seatech on 12 June 2025. Positione

The final XL monopile has been installed at the 488 MW Îles d’Yeu and Noirmoutier offshore wind farm in France. The 61st and final XL monopile has been installed by DEME Group’s Innovation jack-up vessel, marking the successful completion of the drilled foundation installation campaign at the Îles d

Geotechnical surveys have commenced for the 240 MW Jammerland Bugt offshore wind farm in Denmark to support the final project design in preparation for construction work. After several months of geophysical surveys, scanning the seabed using 3D measurements, the next step in the development of the J