
Heerema Marine Contractors’ heavy-lift vessel Aegir has installed the two substation topsides at Ørsted’s 900 MW Greater Changhua 1 and 2a wind farms offshore Taiwan. Manufactured in Singapore by Keppel Offshore & Marine Ltd, the two topsides are the first-ever to be installed in Taiwan’s waters. ”I

The final section of the second of the three 220 kV export cable systems for the Ostwind 2 project is being laid in the German Baltic Sea, 50Hertz Transmission GmbH said. Around 170 kilometres of export cables have been laid at sea and on land over the past months to connect two offshore wind farms

NKT is expanding its presence in Poland with an execution center to prepare for the growing demand for offshore and onshore power cables driven by the development of the local offshore wind market.

Larger wind turbines and larger offshore wind projects alone can reduce a wind farm’s Levelised Cost of Energy (LCoE) by more than 23 per cent relative to the average fixed-bottom offshore wind farm installed in 2019, according to the research carried out by the US Department of Energy’s National Re

The first of the 80 Siemens Gamesa 8 MW wind turbines at the 640 MW Yunlin offshore wind farm has been connected to the Taiwanese grid and the feed-in has commenced, the project developer said. By the end of 2021, the Yunlin offshore wind farm is expected to have the first batch of wind turbines [&h

Bladt Industries will supply 176 transition pieces (TPs) to the Coastal Virginia Offshore Wind (CVOW) project in the US which is, according to the Danish offshore wind foundation manufacturer, its largest TP contract ever. Bladt Industries signed a contract with Dominion Energy following a competiti

Vattenfall has named Siemens Gamesa the Preferred Supplier of wind turbines for the 1.8 GW Norfolk Boreas and the 1.8 GW Norfolk Vanguard wind farms offshore Norfolk, UK. The agreement includes the potential deployment of the new SG 14-236 DD offshore wind turbines and a multi-year Service agreement

A consortium comprising Bladt Industries and Semco Maritime has been awarded a contract for the supply of three offshore substations for the Coastal Virginia Offshore Wind (CVOW) offshore wind farm in the US. Under the contract for the 2,640 MW project, the consortium is in charge of the design, eng

ABM – EV A fully autonomous or semi controlled Robotic Bolting System for Wind Tower Flanges. It is the fastest bolting system on the market as it simultaneously operates two E-RADs that tighten tower bolts ranging from M36 up to M64 (max. 15.000 Nm). The system can be used with a standard E-RAD BLU

Fugro has won two geotechnical site investigation contracts with Energinet for Denmark’s proposed Energy Island project in the North Sea. The company will perform the preliminary geotechnical site investigation for the Energy Island and the adjacent offshore wind farm zone to obtain geo-data, which

Taylor Hopkinson has been awarded a contract to supply freelance on-site commissioning services at the Fécamp offshore wind farm in France. The company will supply electrical safety personnel throughout the commissioning phase including, but not limited to, SAPs, Control Engineers, SCADA Supervisors

US energy company Dominion Energy has selected the consortium of DEME Group and Prysmian as the Balance of Plant (BoP) contractors for the 2.6 GW Coastal Virginia Offshore Wind (CVOW) project.

Rostock-based EEW Special Pipe Constructions GmbH has won a contract to manufacture 176 monopiles for Dominion Energy’s 2.6 GW Coastal Virginia Offshore Wind (CVOW) project. EEW SPC had already delivered two monopiles for the 12 MW CVOW pilot project in April 2020, which were the first monopiles to

US energy company Dominion Energy is filing plans with the Virginia State Corporation Commission for approval to construct the 2.6 GW Coastal Virginia Offshore Wind (CVOW) commercial project. The filing keeps the project on schedule and builds on recent economic development announcements, such as th